 |
 |
What is the Bluetooth® pairing PIN-Code of my Navigation carkit connector?
Your Bluetooth® GPS connector has a default PIN-Code 1111 for pairing, which is stored in its internal memory. You are usually required to enter the PIN-Code 1111 in a pairing process with a Bluetooth® mobile phone.
My Navigation carkit was working perfectly for a long time. Suddenly the sound quality is not the same anymore. What can I do?
When the sound quality is not the same anymore after some time of use, or if your mobile phone indicates "accessory not supported", there might be some dirty contacts between the carkit and the mobile phone. Since the connection system of the mobile phone to the mr Handsfree connector is very fragile and doesn’t accept any dirt or dust, we recommend you to clean the connection points of your mobile phone and your carkit regularly. Please use a fine earstick dipped in ethyl-alcohol (use of some other liquid could damage your mobile phone).
Is it important where I place my microphone?
For optimum performance, the microphone should be located at least 40-50 cm from the drivers’ mouth. Make sure that the microphone is directed towards the driver. Never place the microphone too close to the carkit unit. Experience has shown that the best location is near the rearview mirror or to the left of the sun visor.
Why does the microphone have a button?
The microphone has a 2 positional button for adjusting its sensitivity. By pressing or unpressing the button, you can improve the sound.
Sometimes I hear a high frequency noise in the car radio.
It is possible that your car radio does not have enough RF distortions protection. Please place the carkit unit at least 20 cm from the car radio.
My Navigation carkit is connected to the car radio but does not mute it during a call.
Check the user’s manual of your car radio to make sure that it has a Mute function. If it has a Mute function, there are probably some additional settings that have to be activated in the car radio menu. Activate the necessary settings and make sure that they are done correctly.
Can I use my carkit and have sound through the car speakers?
This is only possible with the optional mr Handsfree ISO cable. Thanks to this professional built-in solution, your conversation is carried over the car speakers. This optional cable can be purchased via our online shop.
I am having a telephone conversation, but the person on the other end of the line does not hear me.
The microphone might be disconnected. Please check the connection of the microphone to the carkit. If the microphone is not disconnected, the microphone’s cord might be damaged and it is recommended to apply to a service center.
Several Bluetooth® devices appear on my mobile phone while it is searching for the Navigation carkit.
Most Bluetooth® enabled mobile phones can search for more than one Bluetooth® device within operative range. The Navigation carkit will appear in the list of Bluetooth® devices on your mobile phone after having been found by your mobile phone. Select the Navigation carkit from the list.
How can I set the volume of my navigation voice in relation to the handsfree speaker?
The volume of the navigation voice and the handsfree speaker can be defined in the navigation software menu on your mobile phone. For example, you can set the volume of the navigation voice louder than the one of the handsfree speaker and vice versa.
|
 |